COOL'E Electronic Co., Ltd
COOL'E Electronic Co., Ltd
Add to Cart
humidification dehumidification controller
The integrated circuit type humidity sensor as the humidity sensing element, has the advantages of high sensitivity, fast response speed, consistency and so on, can be used to measure the relative humidity, display and control, the main functions include: convertible humidification, dehumidification mode, according to the set value of humidity and return difference in humidity control; control the output time delay protection; humidity humidity correction function; alarm and fault alarm function; sensor fault ratio stop
The panel size: 75 x width (mm) 34.5
Technical parameters: Power: 220VAC ± 10%, 50/60Hz power consumption: ≤ 3W
Power supply: 220VAC (1+10 -15%), 50/60Hz
Power consumption: less than 3%
Measuring range: 0%RH ~ 99%RH control range: 10%RH ~ 99%RH resolution: 1%RH; measuring accuracy: 25 ℃, ± (5%RH0.5 word) sensor drift: ± 0.5%RH;
Work output contact capacity: 10A/220VAC, direct drive single phase 0.5HP/220VAC and the following load;
The front panel protection grade: IP54
Operating temperature: 0 ℃ ~ 60 ℃;
Storage temperature: -30 ℃ ~ 75 ℃
Relative humidity: 20 ~ 85%RH (without condensation)